Solid State Drive (SSD) Data Recovery in Bangladesh
- Firmware Corruption.
- Power Surge.
- Faulty Controller Chip.
- Liquid Spill/Flood Damage
- Printed Circuit Board (PCB) Damage.
- Damaged SATA or ZIF Connector.
- Detected as wrong size (e.g Intel 8 MB)
- Accidental Reformatting/Deletion of data.
- Bad Sectors/CRC/Unreadable Sectors.
- File System Corruption.
- Operating System Not booting.
- Not Detected in BIOS
If your SSD has stopped working and you cannot access the data, the best thing to do is to turn it off to prevent further damage. SSD drives may fail due to many reasons (the most common causes are listed above).
We can help you with ANY brand of SSD.
We use specialised professional hardware and software to either temporarily repair the SSD to extract the data or if needed, remove all of the memory chips, copy the data from each memory chip and extract the data using specialised hardware, adapters, readers and software. We have the capability to help you with your faulty SSD.
The time required to recover data from a Solid State Drive may take 1-2 days up to several months for very difficult cases. The average amount of time is 5-10 days and for more difficult cases, the average is 2-4 weeks on average weeks. Instead of giving up – our team will research a new solution to help you if required and it may take much longer for difficult cases.
If you would like a free quote within 24 hours, you will need to let us examine your SSD to confirm the problem and offer you a confirmed quote before we begin our work. We offer several SSD data recovery services.
1,000 -3,000 BD Taka – Basic Software Data Recovery
3,000-15,000 BD Taka- Advanced File System Damage
3,000-8,000 BD Taka- Damaged PCB
15,000-35,000 BD Taka- Firmware Corruption
10,000-40,000 BD Taka- Bad Sectors/Read Errors
1,000-3,000 BD Taka – Deleted Files/Reformatted/Reimaged
10,000-80,000 BD Taka- Hardware Fault (e.g damaged controller chip)